Click here to download the file "speedo_060.prc" version 0.6.0 (9600 baud version). This file should be directly loadable into your palm pilot using your pilot desktop application program. (On some browsers you need to shift+click.) Note, this file is called speedo_060.prc, but should replace the speedo.prc on your pilot as they both have the same registered ID.



== updated June 7, 2002 4:37pm ==

Click here to download the file "speedo_061.prc" version 0.6.1 (9600 baud version). This file should be directly loadable into your palm pilot using your pilot desktop application program. (On some browsers you need to shift+click.) Note, this file is called speedo_061.prc, but should replace the speedo.prc on your pilot as they both have the same registered ID.

Things to look for this go around in 0.6.1:
• Fixed sequence feature so as not to look random.
• Stylus past the bottom of the scale no longer jumps the arrow to the top of the scale.
• Added "Simulate" to the "Misc" pull down menu.
• Added simulate feature to program. Now you should be able to simulate up to 12 light units while not connected to any light units at all.
• Changed all instances of strobe to light units in program.
• Added "tip" or "i" for information page to simulate pop up window.



== updated March 16, 2003 11:24pm ==

Click here to download the file "speedo_063.prc" version 0.6.3 (Windows POSE version). This file should be directly loadable into your palm pilot using your pilot desktop application program. (On some browsers you need to shift+click.) Note, this file is called speedo_063.prc, but should replace the speedo.prc on your pilot as they both have the same registered ID.

Things to look for this go around in 0.6.3:
• This version has been re-written to work using POSE to emulate a Palm Pilot under windows. All other behavior should remain the same.